Martinez Hispania MHTC3 Thinline Classical Guitar

An electro-classical guitar, great for on stage playing, with mahogany back and sides. 

SPECS 

Solid body 46mm thick with resonance chambers 

Mahogany back and sides 

Flamed Maple top 

Neck 650mm 

48mm nut width 

Mahogany neck with Rosewood fingerboard 

Double-action adjustable truss rod 

Double Acoustic SG1 pre-amp system with piezo pickup and microphone, dual DSP module with reverb and delay effects 

Long-lasting and rechargeable Li-Po battery 

Der Jung M1BN-A2B tuners 

Rosewood bridge 

CONTROLS 

The guitar is fitted with an under-saddle transducer pickup and a microphone. 

There are 3 control knobs.  

Closest to the neck of the guitar is the transducer blend/volume. 

The middle one is the microphone blend/volume.  

They allow you to have output from either source or they can be blended together. 

The final knob closest to the bottom of the guitar is a reverb/delay FX. Staring at 0 there should be no effect on the sound, then it slowly blends in a reverb until around halfway when it changes to delay that then blends until the full “on” position. So, 0-4 is reverb intensity and then 5-10 would be delay intensity. 

At the back there are adjustment screws for the EQ which need to be done with a small screwdriver. Two for the microphone, bass and treble and then three for the transducer which has bass, middle and treble. 

It also has 3.5mm headphone jack and a USB socket for charging the battery.